SPEED REGULATOR
- Rated operating speed (min) 0.63 m/s
- Nominal operating speed (max) 2.00 m/s
- Up and down braking in accordance with EN 81:20 and EN 81:50 Elevator directives.
- In accordance with EN 81:20 and EN 81:50, it first cuts the safety contact and then brakes.
- It can be installed in the Engine Room and the Well.
- Tensioner pulley with safety contact.
- It can be used for revision and modernization.
- It is adjusted and sealed according to nominal speeds.
- Connection holes are suitable for other speed governors.
- Suitable for Hydraulic and Electric Elevators.
- It is easy to install and does not require maintenance.
- Optional remote control system, encoder and UCM coil are applied.
UNINTENDED CABIN MOVEMENT (UCM)
- Short locking time.
- 24 VDC / 3.60 amp (Cable brown / 8M Square diode) - 190VDC / 0.38 amp (Cable brown) safety coil.
- Coil control switch.
- It is delivered mounted on the speed governor. It is not compatible with other brands of speed governors.
- Available for revision.
- Our company recommends 90 VDC coils because they are more powerful, less affected by current losses and have a longer energized time.
- Thanks to its full mechanical locking principle, it is 100% safe in case of power outages.
ENCODER COMPATIBLE GEAR SYSTEM
- Ø8 mm shaft diameter is compatible with rotary type encoder.
- Gear ratio is 1/3. (The rotation speed on the panel should be set to 3 times less)
REMOTE CONTROL SYSTEM FOR MACHINE ROOM-FREE WELLS (MRL)
- Pushing, pulling power: 0.85 kg
- Braking coil 220 V, 0.52 amp (Cable blue color - 8M Square diode), 354 ohm - 24 V, 8.05 amp (Cable yellow color)
- Connection to cables via terminal blocks
- Our company recommends 190 VDC coils because they are more powerful, less affected by current losses and have a longer stay-energized time.
